这个配置为什么superPI要2分多钟?怎么想都不太可能啊。。按理说1分钟都不用。。
所在版块:技术の宅 发贴时间:2004-11-02 16:50

用户信息
复制本帖HTML代码
高亮: 今天贴 X 昨天贴 X 前天贴 X 
北京中关村配的,可能的原因哪位高手能分析一下么?谢谢


Name AMD Athlon XP
Code Name Barton
Specification AMD Athlon(tm) XP 2600+
Family / Model / Stepping 6 A 0
Extended Family / Model 7 A
Package Socket A
Technology 0.13 ?/small>
Supported Instructions Sets MMX, Extended MMX, 3DNow!, Extended 3DNow!, SSE
CPU Clock Speed 1916.8 MHz
Clock multiplier x 11.5
Front Side Bus Frequency 166.7 MHz
Bus Speed 333.4 MHz
L1 Data Cache 64 KBytes, 2-way set associative, 64 Bytes line size
L1 Instruction Cache 64 KBytes, 2-way set associative, 64 Bytes line size
L2 Cache 512 KBytes, 16-way set associative, 64 Bytes line size
L2 Speed 1916.8 MHz (Full)
L2 Location On Chip
L2 Data Prefetch Logic yes
L2 Bus Width 64 bits


Memory
DRAM Type DDR-SDRAM
DRAM Size 512 MBytes
DRAM Frequency 200.0 MHz
FSB:DRAM 5:6
CAS# Latency 2.0 clocks
RAS# to CAS# 3 clocks
RAS# Precharge 3 clocks
Cycle Time (TRAS) 8 clocks
.
欢迎来到华新中文网,踊跃发帖是支持我们的最好方法!

 相关帖子 我要回复↙ ↗回到正文
这个配置为什么superPI要2分多钟?怎么想都不太可能啊。。按理说1分钟都不用。。 hula   (929 bytes , 753reads )
内存异步了 banmao   (105 bytes , 244reads )
用其他的测试软件确认一下 逃课专家   (91 bytes , 218reads )
sandra结果如下, hula   (366 bytes , 259reads )
by the way, 用一条内存试试 逃课专家   (0 bytes , 241reads )
L2 cache enabled? 逃课专家   (65 bytes , 237reads )
哪位高手给个建议怎样测试什么有问题?谢谢 hula   (0 bytes , 195reads )
Do you mean it takes 2 min+ to run SuperPi 1M? warcraft3   (157 bytes , 366reads )
是1M,是不是可能cup作假买到假货了?cpuz看出来的一切都正常 hula   (0 bytes , 308reads )
你是不是选成40次了?20次应该是50秒左右 Kula   (0 bytes , 229reads )
First try setting the cpu speed manuly, not using the Bios auto detect speed warcraft3   (112 bytes , 283reads )