用过Labviw的各位大侠救命啊~~~supervisor要我写一套VI来control一个device: HP 83712B Synthesized CW Generator.(其实就是一个signal generator, input values就是frequency和power)

但是以前从来都没有学过labview的啊...他说两天就要看我的结果...哭死了..

连很多基础的知识都还不清楚,居然就要写I/O interface.

他的意思是说,让user在LV的front panel上面输入input freq和input power, 然后send 到那个Singal generator上面并且显示;(write)
然后再把这两个在仪器上面display出来的data由LV的front panel display出来.(Read)

可是我都不知道应该从哪里入手???

哪位以前IA用过labview control equiment的? 救命啊~~~

感谢感谢!!![Minako喳喳 (3-25 22:12, Long long ago)] [ 传统版 | sForum ][登录后回复]1楼

version是Labview 5.0[Minako喳喳 (3-25 22:12, Long long ago)] [ 传统版 | sForum ][登录后回复]2楼

Find device driver already...butit is written for version 6.x & 7.0, not for version 5.0.....

then how should i do?

thanks so much!!![Minako喳喳 (3-26 8:39, Long long ago)] [ 传统版 | sForum ][登录后回复]3楼

先弄清楚device与pc 连接方式，RS232, GPIB or VXIlabview's help 有一些现成的VI with corresponding write and read process， make the consistence of the I/O configuration between hardware and software. 有时候稍做修改基本上可以搞定了.如果出现一些error code, 查一下labview user manual或者一下网上资料。good luck![opera (3-26 10:56, Long long ago)] [ 传统版 | sForum ][登录后回复]4楼

(引用 opera:先弄清楚device与pc 连接方式，RS232, GPIB or VXIlabview's help 有一些现成的VI with corresponding write and read process， make th...)finally got it done!!! Thank you two hah! ^_^ MAUK~~i am so happy!!!!!!!!!!!!!!!!!!!

i am so happy!!!!!!!!!!!!!!!!!!!

i am so happy!!!!!!!!!!!!!!!!!!!

i am so happy!!!!!!!!!!!!!!!!!!!

i am so happy!!!!!!!!!!!!!!!!!!!

i am so happy!!!!!!!!!!!!!!!!!!!

i am so happy!!!!!!!!!!!!!!!!!!!

i am so happy!!!!!!!!!!!!!!!!!!![Minako喳喳 (3-26 17:06, Long long ago)] [ 传统版 | sForum ][登录后回复]5楼