Fitting Instructions:
to be followed each time respirator is worn.

1. Prestretch top and bottom straps before placing respirator on the face (8210/07048). Not necessary for
8110S.
2. Cup the respirator in your hand, with the nosepiece at your fingertips, allowing the headbands to hang
freely below your hand.
3. Position the respirator under your chin with the nosepiece up. Pull the top strap over your head
resting it high at the top back of your head. Pull the bottom strap over your head and position it
around the neck below the ears.
4. Place your fingertips from both hands at the top of the metal nosepiece. Using two hands, mold the
nose area to the shape of your nose by pushing inward while moving your fingertips down both sides
of the nosepiece.
! Pinching the nosepiece using one hand may result in improper fit and less effective respirator
performance. Use two hands.
5. Perform a User Seal Check prior to each wearing. To check fit, place both hands completely over the
respirator and exhale. Be careful not to disturb the position of the respirator. If air leaks around
nose, readjust the nosepiece as described in step. If air leaks at the respirator edges, work the straps
back along the sides of your head.