这个配置为什么superPI要2分多钟?怎么想都不太可能啊。。按理说1分钟都不用。。北京中关村配的,可能的原因哪位高手能分析一下么?谢谢
Name AMD Athlon XP
Code Name Barton
Specification AMD Athlon(tm) XP 2600+
Family / Model / Stepping 6 A 0
Extended Family / Model 7 A
Package Socket A
Technology 0.13 ?/small>
Supported Instructions Sets MMX, Extended MMX, 3DNow!, Extended 3DNow!, SSE
CPU Clock Speed 1916.8 MHz
Clock multiplier x 11.5
Front Side Bus Frequency 166.7 MHz
Bus Speed 333.4 MHz
L1 Data Cache 64 KBytes, 2-way set associative, 64 Bytes line size
L1 Instruction Cache 64 KBytes, 2-way set associative, 64 Bytes line size
L2 Cache 512 KBytes, 16-way set associative, 64 Bytes line size
L2 Speed 1916.8 MHz (Full)
L2 Location On Chip
L2 Data Prefetch Logic yes
L2 Bus Width 64 bits
Memory
DRAM Type DDR-SDRAM
DRAM Size 512 MBytes
DRAM Frequency 200.0 MHz
FSB:DRAM 5:6
CAS# Latency 2.0 clocks
RAS# to CAS# 3 clocks
RAS# Precharge 3 clocks
Cycle Time (TRAS) 8 clocks
Do you mean it takes 2 min+ to run SuperPi 1M?
or maybe the 2 mins+ is for SuperPi 2M or 4M? if it is for 1M, I know there is some problem for this pc but from what you provide I can not find any clue. :(